Driver Frontal Squib 2 Control
Table of contents
B0002 DODGE Possible Causes
- Faulty Driver Air Bag
- Driver Air Bag harness is open or shorted
- Driver Air Bag circuit poor electrical connection
- Faulty Steering Wheel Clockspring
- Faulty Occupant Restraint Controller (ORC)
How do I fix code B0002 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B0001-2B-DRIVER FRONTAL SQUIB 2 CONTROL – WIRES SHORTED TOGETHER
- B0001-11-DRIVER FRONTAL SQUIB 2 CONTROL – CIRCUIT SHORT TO GROUND
- B0001-12-DRIVER FRONTAL SQUIB 2 CONTROL – CIRCUIT SHORT TO BATTERY
- B0001-13-DRIVER FRONTAL SQUIB 2 CONTROL – CIRCUIT OPEN
Cost of diagnosing the B0002 DODGE code
The cost of diagnosing the B0002 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B0002 DODGE Description
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a floating configuration at the ORC (connected to neither power or ground) as protection against inadvertent deployment. Use of the Supplemental Restraints System (SRS) Load Tool Kit to test and substitutes a suspect squib with a known good component. The use of the SRS Load Tool Adaptor provides a test point as well as a method for opening the shorting bar connections within the ORC harness connector.
