Passenger Frontal Squib 1 Control
Table of contents
B0010 JEEP Possible Causes
- Faulty Passenger Air Bag
- Passenger Air Bag harness is open or shorted
- Passenger Air Bag circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How do I fix code B0010 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B0010-2B-PASSENGER FRONTAL SQUIB 1 CONTROL – WIRES SHORTED TOGETHER
- B0010-11-PASSENGER FRONTAL SQUIB 1 CONTROL – CIRCUIT SHORT TO GROUND
- B0010-12-PASSENGER FRONTAL SQUIB 1 CONTROL – CIRCUIT SHORT TO BATTERY
- B0010-13-PASSENGER FRONTAL SQUIB 1 CONTROL – CIRCUIT OPEN
Cost of diagnosing the B0010 JEEP code
The cost of diagnosing the B0010 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B0010 JEEP Description
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a floating configuration at the ORC (connected to neither power nor ground) as protection against inadvertent deployment. Use of the Supplemental Restraints System (SRS) load Tool in the tests below substitutes a suspect squib with a known good component. The use of the SRS Load Tool Adapter provides a test point as well as a method for opening the shorting bar connections within the ORC harness connector.
