SDM Option Configuration Error
Table of contents
B1001 PONTIAC Possible Causes
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
- Inflatable Restraint Sensing and Diagnostic Module (SDM) harness is open or shorted
- Inflatable Restraint Sensing and Diagnostic Module (SDM) circuit poor electrical connection
How do I fix code B1001 PONTIAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
User Submitted Video
Cost of diagnosing the B1001 PONTIAC code
The cost of diagnosing the B1001 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1001 PONTIAC Description
The Inflatable Restraint Sensing and Diagnostic Module (SDM) stores the vehicles restraint ID from the Vehicle Identification Number (VIN) and the last 4 digits of the SDM part number. When the ignition is turned ON, the SDM compares this information to the information stored in the Body Control Module (BCM) over the General Motors Local Area Network (GMLAN) communication circuit. If there is a mismatch between the information stored in the SDM and BCM, DTC B1001 will set.