Lost Communication With UART System
Table of contents
U2142 PONTIAC Possible Causes
- Faulty Universal Asynchronous Receiver Transmitter (UART)
- Universal Asynchronous Receiver Transmitter harness is open or shorted
- Universal Asynchronous Receiver Transmitter circuit poor electrical connection
How do I fix code U2142 PONTIAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U2142 PONTIAC code
The cost of diagnosing the U2142 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U2142 PONTIAC Description
Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device. A loss of serial data communications Diagnostic Trouble Code (DTC) does not represent a failure of the devices that contain the stored code. The DTC will set when a supervised periodic message that includes the transmitter device availability has not been received.