Evaporator Temperature Sensor Circuit Short To Ground
Table of contents
B1030 JEEP Possible Causes
- Faulty Evaporator Temperature Sensor
- Evaporator Temperature Sensor harness is open or shorted
- Evaporator Temperature Sensor circuit poor electrical connection
- Faulty A/C Heater Module
How do I fix code B1030 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1030 JEEP code
The cost of diagnosing the B1030 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1030 JEEP Description
The Evaporator Temperature Sensor is a variable resistor that changes in conjunction with temperature, or otherwise known as a thermistor. The Evaporator Temperature Sensor is located in the HVAC housing downstream of the A/C evaporator. The A/C Heater Module monitors the evaporator temperature by monitoring the voltage change of the Evaporator Temperature Sensor Signal circuit. If the monitored voltage drops below or rises above a predetermined voltage, a Diagnostic Trouble Code (DTC) will set. For further information.