Rear Wiper Select Switch ‘E’ Short To Ground
Table of contents
B2188 Possible Causes
- Faulty Rear Wiper Select Switch ‘E’
- Rear Wiper Select Switch ‘E’ harness is open or shorted
- Rear Wiper Select Switch ‘E’ circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B2188?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2188 code
The cost of diagnosing the B2188 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2188 Description
The Body Control Module (BCM) monitors the Rear Wiper Select Switch ‘E’. The BCM sets the OBDII code when the Rear Wiper Select Switch ‘E’ is not to factory specifications.
