Deck Lid Ready to Latch Left Front Sensor Circuit
Table of contents
B366C PONTIAC Possible Causes
- Faulty Deck Lid Ready to Latch Left Front Sensor
- Deck Lid Ready to Latch Left Front Sensor harness is open or shorted
- Deck Lid Ready to Latch Left Front Sensor circuit poor electrical connection
- Faulty Folding Top Control (FTC) Module
How do I fix code B366C PONTIAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B366C 58 Deck Lid Ready to Latch Left Front Sensor Circuit incorrect reaction after event
- B366C 59 Deck Lid Ready to Latch Left Front Sensor Circuit circuit/component protection time out
Cost of diagnosing the B366C PONTIAC code
The cost of diagnosing the B366C PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B366C PONTIAC Description
S19A and S19B are the Rear Compartment Lid Release switches. The Folding Top Control (FTC) Module uses these switches to determine whether the dowels located on the front corners of the rear decklid are present. The switches are closed and pull the signal circuit low when the dowels are present. The Diagnostic Trouble Code (DTC) sets if an short to ground is detected on the signal circuit of S19A.