Deck Lid Latched Right Front Sensor Circuit
Table of contents
B366D PONTIAC Possible Causes
- Faulty Deck Lid Latched Right Front Sensor
- Deck Lid Latched Right Front Sensor harness is open or shorted
- Deck Lid Latched Right Front Sensor circuit poor electrical connection
- Faulty Folding Top Control (FTC) Module
How do I fix code B366D PONTIAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B366D 58 Deck Lid Latched Right Front Sensor Circuit incorrect reaction after event
- B366D 59 Deck Lid Latched Right Front Sensor Circuit circuit/component protection time out
Cost of diagnosing the B366D PONTIAC code
The cost of diagnosing the B366D PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B366D PONTIAC Description
S10 is part of the Rear Compartment Lid Release Switch – Front Hinge – Right assembly. The Folding Top Control (FTC) Module uses S10 to determine it the right front corner of the rear decklid is latched. S10 is closed and pulls the signal circuit low when the right front corner of the rear decklid is latched. The Diagnostic Trouble Code (DTC) sets if an open or short to ground is detected on the signal circuit of S10.