Longitudinal G Sensor Signal Is Out Of Specified Range
Table of contents
C1015 SUZUKI Possible Causes
- Faulty Yaw Rate Sensor
- Yaw Rate Sensor harness is open or shorted
- Yaw Rate Sensor circuit poor electrical connection
How do I fix code C1015 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- For 4WD vehicles, this Diagnostic Trouble Code (DTC) may be set when a vehicle is lifted up and its wheel(s) is turned. In such case, clear the DTC and check again.
Cost of diagnosing the C1015 SUZUKI code
The cost of diagnosing the C1015 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1015 SUZUKI Description
The Anti-Lock Brake System (ABS) Module monitors the Yaw Rate Sensor. If the signal voltage of G sensor while at a stop does not vary from that while running, this Diagnostic Trouble Code (DTC) is set.
