Pump Motor Circuit Shorted To Voltage Or Motor Ground Open
Table of contents
C1218 PONTIAC Possible Causes
- Faulty Brake Pressure Modulator Valve (BPMV)
- Brake Pressure Modulator Valve (BPMV) harness is open or shorted
- Brake Pressure Modulator Valve (BPMV) circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How do I fix code C1218 PONTIAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1218 PONTIAC code
The cost of diagnosing the C1218 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1218 PONTIAC Description
The system relay is energized when the ignition is ON. The system relay supplies voltage to the solenoid valves and the pump motor. This voltage is referred to as the system voltage. The Electronic Brake Control Module (EBCM) controls each solenoid valve by grounding the solenoid. The EBCM controls the pump motor by grounding the control circuit. The pump serves 2 purposes:
– Transfers brake fluid from the brake calipers to the master cylinder reservoir during pressure decrease events.
– Transfers brake fluid from the master cylinder reservoir to the brake calipers during pressure increase events.