Variable Valve Timing Control Valve
Table of contents
P0015 VOLVO Possible Causes
- Dirty Oil
- Low engine oil level
- Timing belt jumped teeth
- Faulty Variable Valve Timing Control Valve
How do I fix code P0015 VOLVO?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0015 VOLVO code
The cost of diagnosing the P0015 VOLVO code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The P0015 codes is detected by the Engine Control Module (ECM) when the camshaft pulley is in the locked position.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of power
- Engine rough idle
P0015 VOLVO Description
Each time that the engine is switched off, the camshaft pulley sets itself in the locked position. The Engine Control Module (ECM) checks that the camshaft pulley leaves the locked position when the engine is started again.