Intake Valve Control Solenoid Circuit Bank 1
Table of contents
P0075 VOLVO Possible Causes
- Faulty Intake Valve Control Solenoid Bank 1
- Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted
- Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection
How do I fix code P0075 VOLVO?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0075 VOLVO code
The cost of diagnosing the P0075 VOLVO code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
An improper voltage is sent to the Engine Control Module (ECM) through intake valve timing control solenoid valve.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0075 VOLVO Description
Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM).
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.