Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2
Table of contents
- Possible Causes
- How To Fix
- Tech Notes
- Cost To Diagnose
- When is the code detected
- Possible Symptoms
- Description
P0136 SCION Possible Causes
- Faulty Rear Heated Oxygen Sensor Bank 1
- EFI relay
- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How do I fix code P0136 SCION?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem.
Cost of diagnosing the P0136 SCION code
The cost of diagnosing the P0136 SCION code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
It takes more time for the sensor to respond between rich and lean than the specified time.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P0136 SCION Description
The rear Heated Oxygen (HO2) sensor (bank 1 sensor 2) is located behind the Three-Way Catalytic Converter (TWC), and detects the oxygen concentration in the exhaust gas. For optimum TWC operation, the air fuel mixture must be maintained as close as possible to the stoichiometric ratio. The HO2 sensor output voltage changes dramatically in the vicinity of the stoichiometric ratio. By making adjustments in accordance with these signal voltage changes, the ECM adjusts the fuel injection time so that the air-fuel ratio remains as close as possible to stoichiometric levels.