ECM Internal Engine Off Timer Performance
Table of contents
P2610 SCION Possible Causes
- Faulty Engine Control Module (ECM)
- ECM Harness is open or shorted
- ECM Circuit poor electrical connection
- ECM outdated program
How do I fix code P2610 SCION?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2610 SCION code
The cost of diagnosing the P2610 SCION code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2610 SCION Description
5 hours after the ignition switch is turned OFF, the soak timer activates the Engine Control Module (ECM) to begin the EVAP system monitor. While the engine is running, the ECM monitors the synchronization of the soak timer and the CPU clock. If these two are not synchronized, the ECM interprets this as a malfunction, illuminates the MIL and sets the Diagnostic Trouble Code (DTC).
