Transmission Fluid Temperature Sensor Circuit Range/Performance
Table of contents
P0711 PONTIAC Possible Causes
- Faulty Transmission Fluid Temperature Sensor
- Transmission Fluid Temperature Sensor harness is open or shorted
- Transmission Fluid Temperature Sensor circuit poor electrical connection
How do I fix code P0711 PONTIAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0711 PONTIAC code
The cost of diagnosing the P0711 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
Transmission Control Module (TCM) detects excessively low or high voltage from the fluid temperature sensor.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible shifting problems
P0711 PONTIAC Description
The Automatic Transmission Fluid Temperature (TFT) sensor is a resistor, or thermistor, which changes value based on temperature. The sensor has a negative-temperature coefficient. This means that as the temperature increases, the resistance decreases, and as the temperature decreases, the resistance increases. The Powertrain Control Module (PCM) supplies a 5-volt reference signal to the sensor and measures the voltage drop in the circuit. When the transmission fluid is cold, the sensor resistance is high and the PCM detects high signal voltage. As the fluid temperature warms to a normal operating temperature, the resistance becomes less and the signal voltage decreases.