Transmission Input/Turbine Speed Sensor Range/Performance
Table of contents
P0716 HUMMER Possible Causes
- Faulty Transmission Speed Sensor
- Transmission Speed Sensor harness is open or shorted
- Transmission Speed Sensor circuit poor electrical connection
How do I fix code P0716 HUMMER?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0716 HUMMER code
The cost of diagnosing the P0716 HUMMER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
Diagnostic Trouble Code (DTC) P0716 is detected when TCM or ECM does not receive the proper signal from the sensor.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible shifting problems
P0716 HUMMER Description
The Input Speed Sensor (ISS) is a hall-effect type sensor. The ISS mounts to the control valve upper body assembly and connects to the control solenoid (w/body and TCM) valve assembly through a wire harness and connector. The sensor faces the 1-2-3-4 and 3-5-R clutch housing machined teeth surface. The sensor receives 8.3-9.3 volts on the Input/Output Speed Sensor (ISS/OSS) supply voltage circuit from the Transmission Control Module (TCM). As the 1-2-3-4 and 3-5-R clutch housing rotates, the sensor produces a signal frequency based on the machined surface of the 1-2-3-4 and 3-5-R clutch housing. This signal is transmitted through the ISS signal circuit to the control solenoid (w/body and TCM) valve assembly. The control solenoid (w/body and TCM) valve assembly uses the ISS signal to determine line pressure, transmission shift patterns, Torque Converter Clutch (TCC) slip speed and gear ratio.
