Transmission Component Slipping
Table of contents
P1870 PONTIAC Possible Causes
- Trailer towing may set code
- Check transmission fluid level
- Internal transmission fault
How do I fix code P1870 PONTIAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1870 PONTIAC code
The cost of diagnosing the P1870 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1870 PONTIAC Description
With the engine speed over 500 rpm for 5 seconds, Fuel Shutoff inactive, throttle angle from 8.5-35%, Transaxle not in First gear, Transaxle gear range is D4, Transmission Fluid Temperature (TFT) Sensor input 68-266°F, engine torque from 50-200 ft-lbs, engine vacuum 0-105 kPa, Torque Converter Clutch (TCC) commanded on and at Max apply for over 5 seconds, the Powertrain Control Module (PCM) detects a TCC slip speed of over 200 rpm for over 5 seconds, all conditions met for 3 times with TCC commanded off each time in between cycles.