System Too Lean At Higher Load Bank 1
Table of contents
P2191 KIA Possible Causes
- Faulty fuel injector
- Faulty Mass Air Flow (MAF) sensor
- Low fuel pressure condition
- Faulty front HO2S
- Leak in the exhaust system
- Faulty PCV system
How do I fix code P2191 KIA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2191 KIA code
The cost of diagnosing the P2191 KIA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2191 KIA Description
In order to provide the best possible combination of driveability, fuel economy and emission control, the Powertrain Control Module (PCM) uses a closed loop air/fuel metering system. The PCM monitors the HO2S signal voltage and adjusts fuel delivery based it in closed loop fuel control. Changes in fuel delivery will be indicated by the long-term and the short-term fuel trim values. The ideal fuel trim value is around 0%. The PCM will add fuel when the HO2S signal is indicating a lean condition. Additional fuel is indicated by fuel trim values that are above 0%. The PCM will reduce fuel when the HO2S signal is indicating a rich condition. Reduction in fuel is indicated by fuel trim values that are below 0%. The DTC relevant to fuel trim will be set when the amount reaches excessive levels because of a lean or rich condition.
