Secondary Air Injection System Control ‘B’ Circuit Low
Table of contents
P2259 MAZDA Possible Causes
- Faulty Secondary Air System Relay
- Secondary Air System Relay harness is open or shorted
- Secondary Air System Relay circuit poor electrical connection
- Faulty Secondary Air System Pump
How do I fix code P2259 MAZDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2259 MAZDA code
The cost of diagnosing the P2259 MAZDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2259 MAZDA Description
An Air Pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air Pump Relay Control Circuit which energizes the Air Pump. The PCM also grounds the Air Combination Valve Vacuum Control Solenoid Circuit, which energizes the Air Vacuum Control Solenoid. Vacuum is then applied to both Air Combination Valve Diaphragms which opens the shut-off valves. The PCM enables both circuits simultaneously when Air System operation is desired. When the Air System is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut-off valves prevent air flow in either direction.
