Power Sliding Door Control Unit Communication Bus Line Error


Table of contents

B2000 ACURA Possible Causes

  • Faulty Power Sliding Door Control Unit
  • Power Sliding Door Control Unit harness is open or shorted
  • Power Sliding Door Control Unit circuit poor electrical connection

How do I fix code B2000 ACURA?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the B2000 ACURA code

  The cost of diagnosing the B2000 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B2000 ACURA Description

  The Power Sliding Door Control Unit receives inputs from the switches and sensors in the sliding door system and from B-CAN. It outputs to the slide motor, release actuator, and closer motor to control the movement of the doors. It also controls the sliding door beeper and indicator. The OBDII code sets when the Power Sliding Door Control Unit fails to communicate.

0

Leave a Reply

Your email address will not be published. Required fields are marked *