Throttle Position Sensor ‘A’ Circuit Low Voltage


Table of contents

P0122 ACURA Possible Causes

  • Faulty throttle position sensor.
  • Throttle position sensor harness is open or shorted
  • Throttle position sensor circuit poor electrical connection

How do I fix code P0122 ACURA?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P0122 ACURA code

  The cost of diagnosing the P0122 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected

  An excessively low voltage from the Throttle Position Sensor (TPS) is sent to Engine Control Module (ECM).

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0122 ACURA Description

  The throttle position sensor (TPS) responds to the accelerator pedal movement. This sensor is a kind of potentiometer which transforms the throttle position into output voltage, and emits the voltage signal to the Engine Control Module (ECM). In addition, the sensor detects the opening and closing speed of the throttle valve and feeds the voltage signal to the ECM.
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.

0

Leave a Reply

Your email address will not be published. Required fields are marked *