Input Shaft Speed Sensor Circuit No Signal


Table of contents

P0717 ACURA Possible Causes

  • Faulty Transmission Speed Sensor
  • Transmission Speed Sensor harness is open or shorted
  • Transmission Speed Sensor circuit poor electrical connection

How do I fix code P0717 ACURA?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P0717 ACURA code

  The cost of diagnosing the P0717 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected

  Diagnostic Trouble Code (DTC) P0717 is detected when TCM or ECM receives no signal from the sensor.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Possible shifting problems

P0717 ACURA Description

  The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). The ECM sets the OBDII code when the Input Speed Sensor is out of factory specifications.

0

Leave a Reply

Your email address will not be published. Required fields are marked *