Crankshaft Position Sensor A-B Correlation Conditions
Table of contents
P1372 OLDSMOBILE Possible Causes
- Faulty Crankshaft Position (CKP) Sensor
- Crankshaft Position (CKP) Sensor harness is open or shorted
- Crankshaft Position (CKP) Sensor circuit poor electrical connection
- Faulty Ignition Control Module
How do I fix code P1372 OLDSMOBILE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1372 OLDSMOBILE code
The cost of diagnosing the P1372 OLDSMOBILE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1372 OLDSMOBILE Description
With the engine cranking or running, the Powertrain Control Module (PCM) operating in Angle Based mode of decoding the engine position, then the PCM detected an intermittent loss of the signal input from the Crankshaft Position (CKP) Sensor ‘A’ or ‘B’ sensor.