TCC PWM Solenoid Circuit Electrical


Table of contents

P1860 OLDSMOBILE Possible Causes

  • Faulty Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid
  • Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid harness is open or shorted
  • Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid circuit poor electrical connection

How do I fix code P1860 OLDSMOBILE?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Tech Notes

  • There is a factory service bulletin for the following Oldsmobile models:
  • 2000-2002 Oldsmobile Intrigue
  • 2000-2003 Oldsmobile Aurora
  • 2000-2004 Oldsmobile Alero
  • 2000-2004 Oldsmobile Silhouette
  • Oldsmobile Factory Service Bulletin OBDII Code P1860

Cost of diagnosing the P1860 OLDSMOBILE code

  The cost of diagnosing the P1860 OLDSMOBILE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1860 OLDSMOBILE Description

  The Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid valve controls the fluid acting on the converter clutch valve. The converter clutch valve controls the TCC application and release. The solenoid attaches to the control valve body within the transmission. The solenoid receives ignition voltage through circuit 239. The Powertrain Control Module (PCM) controls the solenoid by providing a ground path on circuit 418. Current flows through the solenoid coil according to the duty cycle (percentage of ON and OFF time). The TCC PWM solenoid valve provides a smooth engagement of the torque converter clutch by operating during a duty cycle percent of ON time. When the PCM detects a continuous open, short to ground or short to power in the TCC PWM solenoid valve circuit, then Diagnostic Trouble Code (DTC) P1860 sets. DTC P1860 is a type B DTC.

Leave a Reply

Your email address will not be published. Required fields are marked *