Engine Mount Actuator Control Power Circuit Stuck Off
Table of contents
P16C4 ACURA Possible Causes
- Faulty Engine Mount Actuator
- Engine Mount Actuator harness is open or shorted
- Engine Mount Actuator circuit poor electrical connection
- Faulty Engine Mount Control Unit
How do I fix code P16C4 ACURA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P16C4 ACURA code
The cost of diagnosing the P16C4 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P16C4 ACURA Description
The engine mount control system controls the engine mounts electronically. The system consists of the engine mount actuators, the engine mount control unit, and the powertrain control module (PCM). The engine mount control unit uses the crankshaft and camshaft position sensor outputs (received from the PCM) to estimate engine vibration. The engine mount control unit then sends signals to the engine mount actuators to command the engine mounts to push and pull on the engine to counteract engine vibration. The engine mount control unit monitors the engine mount control unit voltage. If the ACM RLY OUT voltage is set value or less for a set time, the engine mount control unit detects a malfunction and stores a DTC.