Problem In Shift Control System
Table of contents
P1734 ACURA Possible Causes
- Faulty Shift Solenoid Valves
- Shift Solenoid Valves harness is open or shorted
- Shift Solenoid Valves circuit poor electrical connection
How do I fix code P1734 ACURA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1734 ACURA code
The cost of diagnosing the P1734 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P1734 ACURA Description
Hydraulic pressure to each clutch is controlled by the shift valve. The shift valve activates according to the ON/OFF status of shift solenoid valves A, B, C, D, and E. Hydraulic pressure supply in D position is shown above. The line pressure or the clutch pressure control pressure (CPC A, CPC B, or CPC C) is supplied to each clutch by the shift valve activated. The Powertrain Control Module (PCM) computes the actual ratio of mainshaft to countershaft revolutions. If a difference between the actual ratio and the commanded gear occurs when shifting to each gear position, a malfunction in the shift solenoid valve or the hydraulic system is detected and a Diagnostic Trouble Code (DTC) is stored.