Battery Condition Monitor Module Lost Communication With Leak Sensor


Table of contents

P1D63 ACURA Possible Causes

  • Faulty Leak Sensor
  • Leak Sensor harness is open or shorted
  • Leak Sensor circuit poor electrical connection
  • Faulty Battery Condition Monitor Module

How do I fix code P1D63 ACURA?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P1D63 ACURA code

  The cost of diagnosing the P1D63 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1D63 ACURA Description

  The battery condition monitor module communicates with the leak sensor. If the battery condition monitor module does not receive signals from the leak sensor for a set time, or when the information sent from the leak sensor is abnormal and this condition continues for a specified time, the battery condition monitor module detects a malfunction and stores a DTC.

0

Leave a Reply

Your email address will not be published. Required fields are marked *