Traction Motor Temperature Sensor Circuit Range/Performance
Table of contents
P1D6E ACURA Possible Causes
- Faulty Traction Motor Temperature Sensor
- Traction Motor Temperature Sensor harness is open or shorted
- Traction Motor Temperature Sensor circuit poor electrical connection
- Faulty Motor Control Module (Traction)
How do I fix code P1D6E ACURA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1D6E ACURA code
The cost of diagnosing the P1D6E ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P1D6E ACURA Description
The traction motor is cooled by an automatic transmission fluid (ATF)-based oil cooling system and the Motor Control Module (Traction) obtains the ATF temperature and traction motor temperature signals. Normally, the traction motor temperature and the ATF temperature become nearly the same value immediately after the traction motor is started when it is sufficiently cooled down. The motor control module (traction) detects a malfunction and stores a DTC when the difference between the ATF temperature and the traction motor temperature immediately after the motor is started is equal to or more than the prescribed value for the prescribed time or more.