Rocker Arm Oil Pressure Switch Circuit Low Voltage


Table of contents

P2646 ACURA Possible Causes

  • Check engine oil level, oil condition and pressure
  • Faulty Variable Valve Timing and Lift Electronic Control (VTEC) / Rocker Arm Oil Pressure Switch
  • VTEC/Rocker Arm Oil Pressure Switch harness is open or shorted
  • VTEC/Rocker Arm Oil Pressure Switch circuit poor electrical connection

How do I fix code P2646 ACURA?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P2646 ACURA code

  The cost of diagnosing the P2646 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2646 ACURA Description

  The Variable Valve Timing and Lift Electronic Control (VTEC) system activates the Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) by command from the Engine Control Module (ECM) / Powertrain Control Module (PCM), and it charges/discharges the hydraulic circuit of the VTEC mechanism that switches valve timing between Low and High. The ECM/PCM monitors oil pressure in the hydraulic circuit of the VTEC mechanism using the rocker arm oil pressure switch (VTEC oil pressure switch) downstream of the rocker arm oil control solenoid (VTEC solenoid valve). If there is a difference between the oil pressure condition in the hydraulic circuit that is determined by the ECM/PCM command and the oil pressure condition that is determined by the status of the rocker arm oil pressure switch (VTEC oil pressure switch), the system is considered faulty, and the Diagnostic Trouble Code (DTC) is stored.

0

Leave a Reply

Your email address will not be published. Required fields are marked *