‘B’ Camshaft Position Slow Response Bank 1
Table of contents
P000B AUDI Possible Causes
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the variable camshaft timing (VCT) valve body
- Camshaft advance mechanism binding (VCT unit)
- Damaged VCT phaser
- Radio frequency interference (RFI)
How do I fix code P000B AUDI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P000B AUDI code
The cost of diagnosing the P000B AUDI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P000B AUDI Description
The Powertrain Control Module (PCM) monitors and evaluates the response of the actual position on a target position change. The setpoint and camshaft position are saved at the beginning of a setpoint change. If this change over time is large enough (gradient), the camshaft phasing change is evaluated. If the change after the diagnostic time is smaller than a threshold, a slow response is detected, and if the value is greater, then there is no concern. By detecting a concern, an antibounce counter is incremented otherwise the counter is decremented. If the counter exceeds an adjustable limit, the P000B is set.