Exhaust Gas Recirculation Control Circuit Range/Performance


Table of contents

P0404 AUDI Possible Causes

  • EGR volume control solenoid valve
  • EGR volume control solenoid valve harness is open or shorted
  • EGR volume control solenoid valve circuit poor electrical connection
  • EGR temperature sensor and circuit

How do I fix code P0404 AUDI?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P0404 AUDI code

  The cost of diagnosing the P0404 AUDI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected

  An improper voltage signal is sent to ECM through the valve

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine hesitation

P0404 AUDI Description

  Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Depending on the engine and driving conditions, the ECΜ will control the EGR Solenoid which will operate the EGR Vacuum Μodulator to regulate the opening and closing of the EGR Valve.
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.

0

Leave a Reply

Your email address will not be published. Required fields are marked *