Intake Manifold Runner Position Sensor/Switch Circuit Bank 1


Table of contents

P2014 AUDI Possible Causes

  • Faulty Intake Manifold Runner Position Sensor
  • Intake Manifold Runner Position Sensor harness is open or shorted
  • Intake Manifold Runner Position Sensor circuit poor electrical connection
  • Faulty Intake Manifold Runner Control Solenoid Valve
  • Mechanical Defect

How do I fix code P2014 AUDI?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P2014 AUDI code

  The cost of diagnosing the P2014 AUDI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2014 AUDI Description

  Manufacturers can use a variable geometry intake manifold to alter airflow into the manifold under certain conditions. Under low load conditions, a long thin manifold runner is ideal for flow velocity and swirl/turbulence. Under high load demands, a short think runner is ideal. The rate of intake swirl and turbulence is critical to fuel mixture formation and agitation. A position sensor can be fixed to the control circuit to monitor the valve for both electrical and mechanical faults. An actuator test can be performed to test the circuit and live data or an oscilloscope can be used to validate the position feedback.

0

Leave a Reply

Your email address will not be published. Required fields are marked *