Secondary Air Injection System Air Flow/Pressure Bank 1 Sensor Circuit Low

Table of contents

P2432 AUDI Possible Causes

  • Faulty Secondary Air Pressure Sensor
  • Secondary Air Pressure Sensor harness is open or shorted
  • Secondary Air Pressure Sensor circuit poor electrical connection

How do I fix code P2432 AUDI?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P2432 AUDI code

  The cost of diagnosing the P2432 AUDI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2432 AUDI Description

  The AIR system refers to an emissions control system used by some vehicle manufacturers. It is often called secondary air injection, because air, more specifically oxygen, is injected into the exhaust manifold after startup. Vehicles start on a comparatively rich mixture to allow for smoother running conditions. However, this has a significant impact on exhaust gas emissions. A notable increase in hydrocarbon (HC) and carbon monoxide (CO) emissions are found under these rich start conditions. By injecting air into the exhaust manifold the CO and HC can be oxidized. This reaction increases the temperature within the exhaust and the exhaust gas after-treatment system i.e. catalytic converter can begin working earlier due to meeting its light-off temperature.
The system consists of an air pump, a one-way check valve, and associated pipework. The system operates for a predetermined time after startup. Normally this duration is three minutes, when cold.


Leave a Reply

Your email address will not be published. Required fields are marked *